Sharing Lego® projects with the AFOL community

CAT | Slewing bearing 150 mm

This bearing was constructed for my new project, a lemniscate crane. Because I did not want to build as huge as the previous project (Bailey crane, scale 1:20), I could not use Hailfire Droid Wheels for a slewing ring. Having decided for scale 1:30, I needed a slewing bearing with a diameter of appr. 150 mm.  This is what I came up with:

IMG_1141

The basis is an ordinary turntable. To the lower part a stiff table is attached, consisting of 2 layers of Technic bricks, fitted crosswise on top of each other, with tiles (blue) in way of the rollers. The rollers (gray) are fitted to an octagon shaped cage, which is connected via the multicoloured construction, to the upper part of the turntable.

IMG_1142

All the black parts below the turntable will be the octagon shaped crane pedestal (circular in reality) and the rotating part of the crane will have to be atttached to the part above the rollers.

The upper part is driven by a medium PF motor, through a reduction.

No tags Hide

Find it!

Theme Design by devolux.org